Raster Management |
AddRasterConstraints
Adds raster constraints to a loaded raster table for a specific column that constrains spatial ref, scaling, blocksize, alignment, bands, band type and a flag to denote if raster column is regularly blocked. The table must be loaded with data for the constraints to be inferred. Returns true if the constraint setting was accomplished and issues a notice otherwise.
- rasttable, rastcolumn, srid=true, scale_x=true, scale_y=true, blocksize_x=true, blocksize_y=true, same_alignment=true, regular_blocking=false, num_bands=true, pixel_types=true, nodata_values=true, out_db=true, extent=true
- rasttable, rastcolumn, VARIADIC constraints
- rastschema, rasttable, rastcolumn, VARIADIC constraints
- rastschema, rasttable, rastcolumn, srid=true, scale_x=true, scale_y=true, blocksize_x=true, blocksize_y=true, same_alignment=true, regular_blocking=false, num_bands=true, pixel_types=true, nodata_values=true, out_db=true, extent=true
|
DropRasterConstraints
Drops PostGIS raster constraints that refer to a raster table column. Useful if you need to reload data or update your raster column data.
- rasttable, rastcolumn, srid, scale_x, scale_y, blocksize_x, blocksize_y, same_alignment, regular_blocking, num_bands=true, pixel_types=true, nodata_values=true, out_db=true, extent=true
- rastschema, rasttable, rastcolumn, srid=true, scale_x=true, scale_y=true, blocksize_x=true, blocksize_y=true, same_alignment=true, regular_blocking=false, num_bands=true, pixel_types=true, nodata_values=true, out_db=true, extent=true
- rastschema, rasttable, rastcolumn, constraints
|
AddOverviewConstraints
Tag a raster column as being an overview of another.
- ovschema, ovtable, ovcolumn, refschema, reftable, refcolumn, ovfactor
- ovtable, ovcolumn, reftable, refcolumn, ovfactor
|
DropOverviewConstraints
Untag a raster column from being an overview of another.
- ovschema, ovtable, ovcolumn
- ovtable, ovcolumn
|
PostGIS_GDAL_Version
()
Reports the version of the GDAL library in use by PostGIS. |
PostGIS_Raster_Lib_Build_Date
()
Reports full raster library build date. |
PostGIS_Raster_Lib_Version
()
Reports full raster version and build configuration infos. |
ST_GDALDrivers
()
Returns a list of raster formats supported by PostGIS through GDAL. Only those formats with can_write=True can be used by ST_AsGDALRaster |
ST_Contour
(rast, bandnumber=1, level_interval=100.0, level_base=0.0, fixed_levels=ARRAY[], polygonize=false)
Generates a set of vector contours from the provided raster band, using the GDAL contouring algorithm. |
ST_InterpolateRaster
(input_points, algorithm_options, template, template_band_num=1)
Interpolates a gridded surface based on an input set of 3-d points, using the X- and Y-values to position the points on the grid and the Z-value of the points as the surface elevation. |
UpdateRasterSRID
Change the SRID of all rasters in the user-specified column and table.
- schema_name, table_name, column_name, new_srid
- table_name, column_name, new_srid
|
ST_CreateOverview
(tab, col, factor, algo='NearestNeighbor')
Create an reduced resolution version of a given raster coverage. |
Raster Constructors |
ST_AddBand
Returns a raster with the new band(s) of given type added with given initial value in the given index location. If no index is specified, the band is added to the end.
- rast, addbandargset
- rast, index, pixeltype, initialvalue=0, nodataval=NULL
- rast, pixeltype, initialvalue=0, nodataval=NULL
- torast, fromrast, fromband=1, torastindex=at_end
- torast, fromrasts, fromband=1, torastindex=at_end
- rast, index, outdbfile, outdbindex, nodataval=NULL
- rast, outdbfile, outdbindex, index=at_end, nodataval=NULL
|
ST_AsRaster
Converts a PostGIS geometry to a PostGIS raster.
- geom, ref, pixeltype, value=1, nodataval=0, touched=false
- geom, ref, pixeltype=ARRAY['8BUI'], value=ARRAY[1], nodataval=ARRAY[0], touched=false
- geom, scalex, scaley, gridx, gridy, pixeltype, value=1, nodataval=0, skewx=0, skewy=0, touched=false
- geom, scalex, scaley, gridx=NULL, gridy=NULL, pixeltype=ARRAY['8BUI'], value=ARRAY[1], nodataval=ARRAY[0], skewx=0, skewy=0, touched=false
- geom, scalex, scaley, pixeltype, value=1, nodataval=0, upperleftx=NULL, upperlefty=NULL, skewx=0, skewy=0, touched=false
- geom, scalex, scaley, pixeltype, value=ARRAY[1], nodataval=ARRAY[0], upperleftx=NULL, upperlefty=NULL, skewx=0, skewy=0, touched=false
- geom, width, height, gridx, gridy, pixeltype, value=1, nodataval=0, skewx=0, skewy=0, touched=false
- geom, width, height, gridx=NULL, gridy=NULL, pixeltype=ARRAY['8BUI'], value=ARRAY[1], nodataval=ARRAY[0], skewx=0, skewy=0, touched=false
- geom, width, height, pixeltype, value=1, nodataval=0, upperleftx=NULL, upperlefty=NULL, skewx=0, skewy=0, touched=false
- geom, width, height, pixeltype, value=ARRAY[1], nodataval=ARRAY[0], upperleftx=NULL, upperlefty=NULL, skewx=0, skewy=0, touched=false
|
ST_Band
Returns one or more bands of an existing raster as a new raster. Useful for building new rasters from existing rasters.
- rast, nbands = ARRAY[1]
- rast, nband
- rast, nbands, delimiter=,
|
ST_MakeEmptyCoverage
(tilewidth, tileheight, width, height, upperleftx, upperlefty, scalex, scaley, skewx, skewy, srid=unknown)
Cover georeferenced area with a grid of empty raster tiles. |
ST_MakeEmptyRaster
Returns an empty raster (having no bands) of given dimensions (width & height), upperleft X and Y, pixel size and rotation (scalex, scaley, skewx & skewy) and reference system (srid). If a raster is passed in, returns a new raster with the same size, alignment and SRID. If srid is left out, the spatial ref is set to unknown (0).
- rast
- width, height, upperleftx, upperlefty, scalex, scaley, skewx, skewy, srid=unknown
- width, height, upperleftx, upperlefty, pixelsize
|
ST_Tile
Returns a set of rasters resulting from the split of the input raster based upon the desired dimensions of the output rasters.
- rast, nband, width, height, padwithnodata=FALSE, nodataval=NULL
- rast, nband, width, height, padwithnodata=FALSE, nodataval=NULL
- rast, width, height, padwithnodata=FALSE, nodataval=NULL
|
ST_Retile
(tab, col, ext, sfx, sfy, tw, th, algo='NearestNeighbor')
Return a set of configured tiles from an arbitrarily tiled raster coverage. |
ST_FromGDALRaster
(gdaldata, srid=NULL)
Returns a raster from a supported GDAL raster file. |
Raster Accessors |
ST_GeoReference
(rast, format=GDAL)
Returns the georeference meta data in GDAL or ESRI format as commonly seen in a world file. Default is GDAL. |
ST_Height
(rast)
Returns the height of the raster in pixels. |
ST_IsEmpty
(rast)
Returns true if the raster is empty (width = 0 and height = 0). Otherwise, returns false. |
ST_MemSize
(rast)
Returns the amount of space (in bytes) the raster takes. |
ST_MetaData
(rast)
Returns basic meta data about a raster object such as pixel size, rotation (skew), upper, lower left, etc. |
ST_NumBands
(rast)
Returns the number of bands in the raster object. |
ST_PixelHeight
(rast)
Returns the pixel height in geometric units of the spatial reference system. |
ST_PixelWidth
(rast)
Returns the pixel width in geometric units of the spatial reference system. |
ST_ScaleX
(rast)
Returns the X component of the pixel width in units of coordinate reference system. |
ST_ScaleY
(rast)
Returns the Y component of the pixel height in units of coordinate reference system. |
ST_RasterToWorldCoord
(rast, xcolumn, yrow)
Returns the raster's upper left corner as geometric X and Y (longitude and latitude) given a column and row. Column and row starts at 1. |
ST_RasterToWorldCoordX
Returns the geometric X coordinate upper left of a raster, column and row. Numbering of columns and rows starts at 1.
- rast, xcolumn
- rast, xcolumn, yrow
|
ST_RasterToWorldCoordY
Returns the geometric Y coordinate upper left corner of a raster, column and row. Numbering of columns and rows starts at 1.
- rast, yrow
- rast, xcolumn, yrow
|
ST_Rotation
(rast)
Returns the rotation of the raster in radian. |
ST_SkewX
(rast)
Returns the georeference X skew (or rotation parameter). |
ST_SkewY
(rast)
Returns the georeference Y skew (or rotation parameter). |
ST_SRID
(rast)
Returns the spatial reference identifier of the raster as defined in spatial_ref_sys table. |
ST_Summary
(rast)
Returns a text summary of the contents of the raster. |
ST_UpperLeftX
(rast)
Returns the upper left X coordinate of raster in projected spatial ref. |
ST_UpperLeftY
(rast)
Returns the upper left Y coordinate of raster in projected spatial ref. |
ST_Width
(rast)
Returns the width of the raster in pixels. |
ST_WorldToRasterCoord
Returns the upper left corner as column and row given geometric X and Y (longitude and latitude) or a point geometry expressed in the spatial reference coordinate system of the raster.
- rast, pt
- rast, longitude, latitude
|
ST_WorldToRasterCoordX
Returns the column in the raster of the point geometry (pt) or a X and Y world coordinate (xw, yw) represented in world spatial reference system of raster.
- rast, pt
- rast, xw
- rast, xw, yw
|
ST_WorldToRasterCoordY
Returns the row in the raster of the point geometry (pt) or a X and Y world coordinate (xw, yw) represented in world spatial reference system of raster.
- rast, pt
- rast, xw
- rast, xw, yw
|
Raster Pixel Accessors and Setters |
ST_PixelAsPolygon
(rast, columnx, rowy)
Returns the polygon geometry that bounds the pixel for a particular row and column. |
ST_PixelAsPolygons
(rast, band=1, exclude_nodata_value=TRUE)
Returns the polygon geometry that bounds every pixel of a raster band along with the value, the X and the Y raster coordinates of each pixel. |
ST_PixelAsPoint
(rast, columnx, rowy)
Returns a point geometry of the pixel's upper-left corner. |
ST_PixelAsPoints
(rast, band=1, exclude_nodata_value=TRUE)
Returns a point geometry for each pixel of a raster band along with the value, the X and the Y raster coordinates of each pixel. The coordinates of the point geometry are of the pixel's upper-left corner. |
ST_PixelAsCentroid
(rast, x, y)
Returns the centroid (point geometry) of the area represented by a pixel. |
ST_PixelAsCentroids
(rast, band=1, exclude_nodata_value=TRUE)
Returns the centroid (point geometry) for each pixel of a raster band along with the value, the X and the Y raster coordinates of each pixel. The point geometry is the centroid of the area represented by a pixel. |
ST_Value
Returns the value of a given band in a given columnx, rowy pixel or at a particular geometric point. Band numbers start at 1 and assumed to be 1 if not specified. If exclude_nodata_value is set to false, then all pixels include nodata pixels are considered to intersect and return value. If exclude_nodata_value is not passed in then reads it from metadata of raster.
- rast, pt, exclude_nodata_value=true
- rast, band, pt, exclude_nodata_value=true, resample='nearest'
- rast, x, y, exclude_nodata_value=true
- rast, band, x, y, exclude_nodata_value=true
|
ST_NearestValue
Returns the nearest non-NODATA value of a given band's pixel specified by a columnx and rowy or a geometric point expressed in the same spatial reference coordinate system as the raster.
- rast, bandnum, pt, exclude_nodata_value=true
- rast, pt, exclude_nodata_value=true
- rast, bandnum, columnx, rowy, exclude_nodata_value=true
- rast, columnx, rowy, exclude_nodata_value=true
|
ST_SetZ
(rast, geom, resample=nearest, band=1)
Returns a geometry with the same X/Y coordinates as the input geometry, and values from the raster copied into the Z dimension using the requested resample algorithm. |
ST_SetM
(rast, geom, resample=nearest, band=1)
Returns a geometry with the same X/Y coordinates as the input geometry, and values from the raster copied into the M dimension using the requested resample algorithm. |
ST_Neighborhood
Returns a 2-D double precision array of the non-NODATA values around a given band's pixel specified by either a columnX and rowY or a geometric point expressed in the same spatial reference coordinate system as the raster.
- rast, bandnum, columnX, rowY, distanceX, distanceY, exclude_nodata_value=true
- rast, columnX, rowY, distanceX, distanceY, exclude_nodata_value=true
- rast, bandnum, pt, distanceX, distanceY, exclude_nodata_value=true
- rast, pt, distanceX, distanceY, exclude_nodata_value=true
|
ST_SetValue
Returns modified raster resulting from setting the value of a given band in a given columnx, rowy pixel or the pixels that intersect a particular geometry. Band numbers start at 1 and assumed to be 1 if not specified.
- rast, bandnum, geom, newvalue
- rast, geom, newvalue
- rast, bandnum, columnx, rowy, newvalue
- rast, columnx, rowy, newvalue
|
ST_SetValues
Returns modified raster resulting from setting the values of a given band.
- rast, nband, columnx, rowy, newvalueset, noset=NULL, keepnodata=FALSE
- rast, nband, columnx, rowy, newvalueset, nosetvalue, keepnodata=FALSE
- rast, nband, columnx, rowy, width, height, newvalue, keepnodata=FALSE
- rast, columnx, rowy, width, height, newvalue, keepnodata=FALSE
- rast, nband, geomvalset, keepnodata=FALSE
|
ST_DumpValues
Get the values of the specified band as a 2-dimension array.
- rast, nband=NULL, exclude_nodata_value=true
- rast, nband, exclude_nodata_value=true
|
ST_PixelOfValue
Get the columnx, rowy coordinates of the pixel whose value equals the search value.
- rast, nband, search, exclude_nodata_value=true
- rast, search, exclude_nodata_value=true
- rast, nband, search, exclude_nodata_value=true
- rast, search, exclude_nodata_value=true
|
Raster Editors |
ST_SetGeoReference
Set Georeference 6 georeference parameters in a single call. Numbers should be separated by white space. Accepts inputs in GDAL or ESRI format. Default is GDAL.
- rast, georefcoords, format=GDAL
- rast, upperleftx, upperlefty, scalex, scaley, skewx, skewy
|
ST_SetRotation
(rast, rotation)
Set the rotation of the raster in radian. |
ST_SetScale
Sets the X and Y size of pixels in units of coordinate reference system. Number units/pixel width/height.
- rast, xy
- rast, x, y
|
ST_SetSkew
Sets the georeference X and Y skew (or rotation parameter). If only one is passed in, sets X and Y to the same value.
- rast, skewxy
- rast, skewx, skewy
|
ST_SetSRID
(rast, srid)
Sets the SRID of a raster to a particular integer srid defined in the spatial_ref_sys table. |
ST_SetUpperLeft
(rast, x, y)
Sets the value of the upper left corner of the pixel of the raster to projected X and Y coordinates. |
ST_Resample
Resample a raster using a specified resampling algorithm, new dimensions, an arbitrary grid corner and a set of raster georeferencing attributes defined or borrowed from another raster.
- rast, width, height, gridx=NULL, gridy=NULL, skewx=0, skewy=0, algorithm=NearestNeighbor, maxerr=0.125
- rast, scalex=0, scaley=0, gridx=NULL, gridy=NULL, skewx=0, skewy=0, algorithm=NearestNeighbor, maxerr=0.125
- rast, ref, algorithm=NearestNeighbor, maxerr=0.125, usescale=true
- rast, ref, usescale, algorithm=NearestNeighbor, maxerr=0.125
|
ST_Rescale
Resample a raster by adjusting only its scale (or pixel size). New pixel values are computed using the NearestNeighbor (english or american spelling), Bilinear, Cubic, CubicSpline, Lanczos, Max or Min resampling algorithm. Default is NearestNeighbor.
- rast, scalexy, algorithm=NearestNeighbor, maxerr=0.125
- rast, scalex, scaley, algorithm=NearestNeighbor, maxerr=0.125
|
ST_Reskew
Resample a raster by adjusting only its skew (or rotation parameters). New pixel values are computed using the NearestNeighbor (english or american spelling), Bilinear, Cubic, CubicSpline or Lanczos resampling algorithm. Default is NearestNeighbor.
- rast, skewxy, algorithm=NearestNeighbor, maxerr=0.125
- rast, skewx, skewy, algorithm=NearestNeighbor, maxerr=0.125
|
ST_SnapToGrid
Resample a raster by snapping it to a grid. New pixel values are computed using the NearestNeighbor (english or american spelling), Bilinear, Cubic, CubicSpline or Lanczos resampling algorithm. Default is NearestNeighbor.
- rast, gridx, gridy, algorithm=NearestNeighbor, maxerr=0.125, scalex=DEFAULT 0, scaley=DEFAULT 0
- rast, gridx, gridy, scalex, scaley, algorithm=NearestNeighbor, maxerr=0.125
- rast, gridx, gridy, scalexy, algorithm=NearestNeighbor, maxerr=0.125
|
ST_Resize
Resize a raster to a new width/height
- rast, width, height, algorithm=NearestNeighbor, maxerr=0.125
- rast, percentwidth, percentheight, algorithm=NearestNeighbor, maxerr=0.125
- rast, width, height, algorithm=NearestNeighbor, maxerr=0.125
|
ST_Transform
Reprojects a raster in a known spatial reference system to another known spatial reference system using specified resampling algorithm. Options are NearestNeighbor, Bilinear, Cubic, CubicSpline, Lanczos defaulting to NearestNeighbor.
- rast, srid, algorithm=NearestNeighbor, maxerr=0.125, scalex, scaley
- rast, srid, scalex, scaley, algorithm=NearestNeighbor, maxerr=0.125
- rast, alignto, algorithm=NearestNeighbor, maxerr=0.125
|
Raster Band Statistics and Analytics |
ST_Count
Returns the number of pixels in a given band of a raster or raster coverage. If no band is specified defaults to band 1. If exclude_nodata_value is set to true, will only count pixels that are not equal to the nodata value.
- rast, nband=1, exclude_nodata_value=true
- rast, exclude_nodata_value
|
ST_CountAgg
Aggregate. Returns the number of pixels in a given band of a set of rasters. If no band is specified defaults to band 1. If exclude_nodata_value is set to true, will only count pixels that are not equal to the NODATA value.
- rast, nband, exclude_nodata_value, sample_percent
- rast, nband, exclude_nodata_value
- rast, exclude_nodata_value
|
ST_Histogram
Returns a set of record summarizing a raster or raster coverage data distribution separate bin ranges. Number of bins are autocomputed if not specified.
- rast, nband=1, exclude_nodata_value=true, bins=autocomputed, width=NULL, right=false
- rast, nband, bins, width=NULL, right=false
- rast, nband, exclude_nodata_value, bins, right
- rast, nband, bins, right
|
ST_Quantile
Compute quantiles for a raster or raster table coverage in the context of the sample or population. Thus, a value could be examined to be at the raster's 25%, 50%, 75% percentile.
- rast, nband=1, exclude_nodata_value=true, quantiles=NULL
- rast, quantiles
- rast, nband, quantiles
- rast, quantile
- rast, exclude_nodata_value, quantile=NULL
- rast, nband, quantile
- rast, nband, exclude_nodata_value, quantile
- rast, nband, quantile
|
ST_SummaryStats
Returns summarystats consisting of count, sum, mean, stddev, min, max for a given raster band of a raster or raster coverage. Band 1 is assumed is no band is specified.
- rast, exclude_nodata_value
- rast, nband, exclude_nodata_value
|
ST_SummaryStatsAgg
Aggregate. Returns summarystats consisting of count, sum, mean, stddev, min, max for a given raster band of a set of raster. Band 1 is assumed is no band is specified.
- rast, nband, exclude_nodata_value, sample_percent
- rast, exclude_nodata_value, sample_percent
- rast, nband, exclude_nodata_value
|
ST_ValueCount
Returns a set of records containing a pixel band value and count of the number of pixels in a given band of a raster (or a raster coverage) that have a given set of values. If no band is specified defaults to band 1. By default nodata value pixels are not counted. and all other values in the pixel are output and pixel band values are rounded to the nearest integer.
- rast, nband=1, exclude_nodata_value=true, searchvalues=NULL, roundto=0,
- rast, nband, searchvalues, roundto=0,
- rast, searchvalues, roundto=0,
- rast, searchvalue, roundto=0
- rast, nband, exclude_nodata_value, searchvalue, roundto=0
- rast, nband, searchvalue, roundto=0
- rastertable, rastercolumn, nband=1, exclude_nodata_value=true, searchvalues=NULL, roundto=0,
- rastertable, rastercolumn, searchvalues, roundto=0,
- rastertable, rastercolumn, nband, searchvalues, roundto=0,
- rastertable, rastercolumn, nband, exclude_nodata_value, searchvalue, roundto=0
- rastertable, rastercolumn, searchvalue, roundto=0
- rastertable, rastercolumn, nband, searchvalue, roundto=0
|
Raster Outputs |
ST_AsBinary/ST_AsWKB
Return the Well-Known Binary (WKB) representation of the raster.
- rast, outasin=FALSE
- rast, outasin=FALSE
|
ST_AsHexWKB
(rast, outasin=FALSE)
Return the Well-Known Binary (WKB) in Hex representation of the raster. |
ST_AsGDALRaster
(rast, format, options=NULL, srid=sameassource)
Return the raster tile in the designated GDAL Raster format. Raster formats are one of those supported by your compiled library. Use ST_GDALDrivers() to get a list of formats supported by your library. |
ST_AsJPEG
Return the raster tile selected bands as a single Joint Photographic Exports Group (JPEG) image (byte array). If no band is specified and 1 or more than 3 bands, then only the first band is used. If only 3 bands then all 3 bands are used and mapped to RGB.
- rast, options=NULL
- rast, nband, quality
- rast, nband, options=NULL
- rast, nbands, options=NULL
- rast, nbands, quality
|
ST_AsPNG
Return the raster tile selected bands as a single portable network graphics (PNG) image (byte array). If 1, 3, or 4 bands in raster and no bands are specified, then all bands are used. If more 2 or more than 4 bands and no bands specified, then only band 1 is used. Bands are mapped to RGB or RGBA space.
- rast, options=NULL
- rast, nband, compression
- rast, nband, options=NULL
- rast, nbands, compression
- rast, nbands, options=NULL
|
ST_AsTIFF
Return the raster selected bands as a single TIFF image (byte array). If no band is specified or any of specified bands does not exist in the raster, then will try to use all bands.
- rast, options='', srid=sameassource
- rast, compression='', srid=sameassource
- rast, nbands, compression='', srid=sameassource
- rast, nbands, options, srid=sameassource
|
Raster Processing: Map Algebra |
ST_Clip
Returns the raster clipped by the input geometry. If band number is not specified, all bands are processed. If crop is not specified or TRUE, the output raster is cropped. If touched is set to TRUE, then touched pixels are included, otherwise only if the center of the pixel is in the geometry it is included.
- rast, nband, geom, nodataval=NULL, crop=TRUE, touched=FALSE
- rast, nband, geom, nodataval, crop=TRUE, touched=FALSE
- rast, nband, geom, crop, touched=FALSE
- rast, geom, nodataval=NULL, crop=TRUE, touched=FALSE
- rast, geom, nodataval, crop=TRUE, touched=FALSE
- rast, geom, crop, touched=FALSE
|
ST_ColorMap
Creates a new raster of up to four 8BUI bands (grayscale, RGB, RGBA) from the source raster and a specified band. Band 1 is assumed if not specified.
- rast, nband=1, colormap=grayscale, method=INTERPOLATE
- rast, colormap, method=INTERPOLATE
|
ST_Grayscale
Creates a new one-8BUI band raster from the source raster and specified bands representing Red, Green and Blue
- rast, redband=1, greenband=2, blueband=3, extenttype=INTERSECTION
- rastbandargset, extenttype=INTERSECTION
|
ST_Intersection
Returns a raster or a set of geometry-pixelvalue pairs representing the shared portion of two rasters or the geometrical intersection of a vectorization of the raster and a geometry.
- geom, rast, band_num=1
- rast, geom
- rast, band, geomin
- rast1, rast2, nodataval
- rast1, rast2, returnband, nodataval
- rast1, band1, rast2, band2, nodataval
- rast1, band1, rast2, band2, returnband, nodataval
|
ST_MapAlgebra (callback function version)
Callback function version - Returns a one-band raster given one or more input rasters, band indexes and one user-specified callback function.
- rastbandargset, callbackfunc, pixeltype=NULL, extenttype=INTERSECTION, customextent=NULL, distancex=0, distancey=0, VARIADIC userargs=NULL
- rast, nband, callbackfunc, pixeltype=NULL, extenttype=FIRST, customextent=NULL, distancex=0, distancey=0, VARIADIC userargs=NULL
- rast, nband, callbackfunc, pixeltype=NULL, extenttype=FIRST, customextent=NULL, distancex=0, distancey=0, VARIADIC userargs=NULL
- rast1, nband1, rast2, nband2, callbackfunc, pixeltype=NULL, extenttype=INTERSECTION, customextent=NULL, distancex=0, distancey=0, VARIADIC userargs=NULL
- rast, nband, callbackfunc, mask, weighted, pixeltype=NULL, extenttype=INTERSECTION, customextent=NULL, VARIADIC userargs=NULL
|
ST_MapAlgebra (expression version)
Expression version - Returns a one-band raster given one or two input rasters, band indexes and one or more user-specified SQL expressions.
- rast, nband, pixeltype, expression, nodataval=NULL
- rast, pixeltype, expression, nodataval=NULL
- rast1, nband1, rast2, nband2, expression, pixeltype=NULL, extenttype=INTERSECTION, nodata1expr=NULL, nodata2expr=NULL, nodatanodataval=NULL
- rast1, rast2, expression, pixeltype=NULL, extenttype=INTERSECTION, nodata1expr=NULL, nodata2expr=NULL, nodatanodataval=NULL
|
ST_MapAlgebraExpr
1 raster band version: Creates a new one band raster formed by applying a valid PostgreSQL algebraic operation on the input raster band and of pixeltype provided. Band 1 is assumed if no band is specified.
- rast, band, pixeltype, expression, nodataval=NULL
- rast, pixeltype, expression, nodataval=NULL
|
ST_MapAlgebraExpr
2 raster band version: Creates a new one band raster formed by applying a valid PostgreSQL algebraic operation on the two input raster bands and of pixeltype provided. band 1 of each raster is assumed if no band numbers are specified. The resulting raster will be aligned (scale, skew and pixel corners) on the grid defined by the first raster and have its extent defined by the "extenttype" parameter. Values for "extenttype" can be: INTERSECTION, UNION, FIRST, SECOND.
- rast1, rast2, expression, pixeltype=same_as_rast1_band, extenttype=INTERSECTION, nodata1expr=NULL, nodata2expr=NULL, nodatanodataval=NULL
- rast1, band1, rast2, band2, expression, pixeltype=same_as_rast1_band, extenttype=INTERSECTION, nodata1expr=NULL, nodata2expr=NULL, nodatanodataval=NULL
|
ST_MapAlgebraFct
1 band version - Creates a new one band raster formed by applying a valid PostgreSQL function on the input raster band and of pixeltype prodived. Band 1 is assumed if no band is specified.
- rast, onerasteruserfunc
- rast, onerasteruserfunc, VARIADIC args
- rast, pixeltype, onerasteruserfunc
- rast, pixeltype, onerasteruserfunc, VARIADIC args
- rast, band, onerasteruserfunc
- rast, band, onerasteruserfunc, VARIADIC args
- rast, band, pixeltype, onerasteruserfunc
- rast, band, pixeltype, onerasteruserfunc, VARIADIC args
|
ST_MapAlgebraFct
2 band version - Creates a new one band raster formed by applying a valid PostgreSQL function on the 2 input raster bands and of pixeltype prodived. Band 1 is assumed if no band is specified. Extent type defaults to INTERSECTION if not specified.
- rast1, rast2, tworastuserfunc, pixeltype=same_as_rast1, extenttype=INTERSECTION, VARIADIC userargs
- rast1, band1, rast2, band2, tworastuserfunc, pixeltype=same_as_rast1, extenttype=INTERSECTION, VARIADIC userargs
|
ST_MapAlgebraFctNgb
(rast, band, pixeltype, ngbwidth, ngbheight, onerastngbuserfunc, nodatamode, VARIADIC args)
1-band version: Map Algebra Nearest Neighbor using user-defined PostgreSQL function. Return a raster which values are the result of a PLPGSQL user function involving a neighborhood of values from the input raster band. |
ST_Reclass
Creates a new raster composed of band types reclassified from original. The nband is the band to be changed. If nband is not specified assumed to be 1. All other bands are returned unchanged. Use case: convert a 16BUI band to a 8BUI and so forth for simpler rendering as viewable formats.
- rast, nband, reclassexpr, pixeltype, nodataval=NULL
- rast, VARIADIC reclassargset
- rast, reclassexpr, pixeltype
|
ST_Union
Returns the union of a set of raster tiles into a single raster composed of 1 or more bands.
- rast
- rast, unionargset
- rast, nband
- rast, uniontype
- rast, nband, uniontype
|
Built-in Map Algebra Callback Functions |
ST_Distinct4ma
Raster processing function that calculates the number of unique pixel values in a neighborhood.
- matrix, nodatamode, VARIADIC args
- value, pos, VARIADIC userargs
|
ST_InvDistWeight4ma
(value, pos, VARIADIC userargs)
Raster processing function that interpolates a pixel's value from the pixel's neighborhood. |
ST_Max4ma
Raster processing function that calculates the maximum pixel value in a neighborhood.
- matrix, nodatamode, VARIADIC args
- value, pos, VARIADIC userargs
|
ST_Mean4ma
Raster processing function that calculates the mean pixel value in a neighborhood.
- matrix, nodatamode, VARIADIC args
- value, pos, VARIADIC userargs
|
ST_Min4ma
Raster processing function that calculates the minimum pixel value in a neighborhood.
- matrix, nodatamode, VARIADIC args
- value, pos, VARIADIC userargs
|
ST_MinDist4ma
(value, pos, VARIADIC userargs)
Raster processing function that returns the minimum distance (in number of pixels) between the pixel of interest and a neighboring pixel with value. |
ST_Range4ma
Raster processing function that calculates the range of pixel values in a neighborhood.
- matrix, nodatamode, VARIADIC args
- value, pos, VARIADIC userargs
|
ST_StdDev4ma
Raster processing function that calculates the standard deviation of pixel values in a neighborhood.
- matrix, nodatamode, VARIADIC args
- value, pos, VARIADIC userargs
|
ST_Sum4ma
Raster processing function that calculates the sum of all pixel values in a neighborhood.
- matrix, nodatamode, VARIADIC args
- value, pos, VARIADIC userargs
|
Raster Processing: DEM (Elevation) |
ST_Aspect
Returns the aspect (in degrees by default) of an elevation raster band. Useful for analyzing terrain.
- rast, band=1, pixeltype=32BF, units=DEGREES, interpolate_nodata=FALSE
- rast, band, customextent, pixeltype=32BF, units=DEGREES, interpolate_nodata=FALSE
|
ST_HillShade
Returns the hypothetical illumination of an elevation raster band using provided azimuth, altitude, brightness and scale inputs.
- rast, band=1, pixeltype=32BF, azimuth=315, altitude=45, max_bright=255, scale=1.0, interpolate_nodata=FALSE
- rast, band, customextent, pixeltype=32BF, azimuth=315, altitude=45, max_bright=255, scale=1.0, interpolate_nodata=FALSE
|
ST_Roughness
(rast, nband, customextent, pixeltype="32BF", interpolate_nodata=FALSE )
Returns a raster with the calculated "roughness" of a DEM. |
ST_Slope
Returns the slope (in degrees by default) of an elevation raster band. Useful for analyzing terrain.
- rast, nband=1, pixeltype=32BF, units=DEGREES, scale=1.0, interpolate_nodata=FALSE
- rast, nband, customextent, pixeltype=32BF, units=DEGREES, scale=1.0, interpolate_nodata=FALSE
|
ST_TPI
(rast, nband, customextent, pixeltype="32BF", interpolate_nodata=FALSE )
Returns a raster with the calculated Topographic Position Index. |
ST_TRI
(rast, nband, customextent, pixeltype="32BF", interpolate_nodata=FALSE )
Returns a raster with the calculated Terrain Ruggedness Index. |
Raster and Raster Band Spatial Relationships |
ST_Contains
Return true if no points of raster rastB lie in the exterior of raster rastA and at least one point of the interior of rastB lies in the interior of rastA.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
|
ST_ContainsProperly
Return true if rastB intersects the interior of rastA but not the boundary or exterior of rastA.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
|
ST_Covers
Return true if no points of raster rastB lie outside raster rastA.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
|
ST_CoveredBy
Return true if no points of raster rastA lie outside raster rastB.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
|
ST_Disjoint
Return true if raster rastA does not spatially intersect rastB.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
|
ST_Intersects
Return true if raster rastA spatially intersects raster rastB.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
- rast, nband, geommin
- rast, geommin, nband=NULL
- geommin, rast, nband=NULL
|
ST_Overlaps
Return true if raster rastA and rastB intersect but one does not completely contain the other.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
|
ST_Touches
Return true if raster rastA and rastB have at least one point in common but their interiors do not intersect.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
|
ST_SameAlignment
Returns true if rasters have same skew, scale, spatial ref, and offset (pixels can be put on same grid without cutting into pixels) and false if they don't with notice detailing issue.
- rastA, rastB
- ulx1, uly1, scalex1, scaley1, skewx1, skewy1, ulx2, uly2, scalex2, scaley2, skewx2, skewy2
- rastfield agg
|
ST_NotSameAlignmentReason
(rastA, rastB)
Returns text stating if rasters are aligned and if not aligned, a reason why. |
ST_Within
Return true if no points of raster rastA lie in the exterior of raster rastB and at least one point of the interior of rastA lies in the interior of rastB.
- rastA, nbandA, rastB, nbandB
- rastA, rastB
|
ST_DWithin
Return true if rasters rastA and rastB are within the specified distance of each other.
- rastA, nbandA, rastB, nbandB, distance_of_srid
- rastA, rastB, distance_of_srid
|
ST_DFullyWithin
Return true if rasters rastA and rastB are fully within the specified distance of each other.
- rastA, nbandA, rastB, nbandB, distance_of_srid
- rastA, rastB, distance_of_srid
|