ST_Scale — Scale a geometry by given factors.

`geometry `

geometry **ST_Scale**(`geomA`, float `XFactor`, float `YFactor`, float `ZFactor``)`

;

`geometry `

geometry **ST_Scale**(`geomA`, float `XFactor`, float `YFactor``)`

;

`geometry `

geometry **ST_Scale**(`geom`, geometry `factor``)`

;

`geometry `

geometry **ST_Scale**(`geom`, geometry `factor`, geometry `origin``)`

;

Scales the geometry to a new size by multiplying the ordinates with the corresponding factor parameters.

The version taking a geometry as the `factor`

parameter
allows passing a 2d, 3dm, 3dz or 4d point to set scaling factor for all
supported dimensions. Missing dimensions in the `factor`

point are equivalent to no scaling the corresponding dimension.

The three-geometry variant allows a "false origin" for the scaling to be passed in. This allows "scaling in place", for example using the centroid of the geometry as the false origin. Without a false origin, scaling takes place relative to the actual origin, so all coordinates are just multipled by the scale factor.

Prior to 1.3.4, this function crashes if used with geometries that contain CURVES. This is fixed in 1.3.4+ |

Availability: 1.1.0.

Enhanced: 2.0.0 support for Polyhedral surfaces, Triangles and TIN was introduced.

Enhanced: 2.2.0 support for scaling all dimension (`factor`

parameter) was introduced.

Enhanced: 2.5.0 support for scaling relative to a local origin (`origin`

parameter) was introduced.

This function supports Polyhedral surfaces.

This function supports 3d and will not drop the z-index.

This method supports Circular Strings and Curves

This function supports Triangles and Triangulated Irregular Network Surfaces (TIN).

This function supports M coordinates.

--Version 1: scale X, Y, Z SELECT ST_AsEWKT(ST_Scale(ST_GeomFromEWKT('LINESTRING(1 2 3, 1 1 1)'), 0.5, 0.75, 0.8)); st_asewkt -------------------------------------- LINESTRING(0.5 1.5 2.4,0.5 0.75 0.8) --Version 2: Scale X Y SELECT ST_AsEWKT(ST_Scale(ST_GeomFromEWKT('LINESTRING(1 2 3, 1 1 1)'), 0.5, 0.75)); st_asewkt ---------------------------------- LINESTRING(0.5 1.5 3,0.5 0.75 1) --Version 3: Scale X Y Z M SELECT ST_AsEWKT(ST_Scale(ST_GeomFromEWKT('LINESTRING(1 2 3 4, 1 1 1 1)'), ST_MakePoint(0.5, 0.75, 2, -1))); st_asewkt ---------------------------------------- LINESTRING(0.5 1.5 6 -4,0.5 0.75 2 -1) --Version 4: Scale X Y using false origin SELECT ST_AsText(ST_Scale('LINESTRING(1 1, 2 2)', 'POINT(2 2)', 'POINT(1 1)'::geometry)); st_astext --------------------- LINESTRING(1 1,3 3)